Curved manual with a 60 by 18 in slat deck, three magnetic resistance levels and a 300 lb rating. Sold only on SB Fitness's site.
Built for walking, jogging and intervals. Without its bolt-on rails it loses resistance adjustment, as the lever sits on the right upright.
Compare every walking pad we track - Vitalwalk, Jogwell, Office Walker, Walkolution, SB Fitness Equipment, and more - on price, motor, warranty and noise.

For home use, SB Fitness covers the frame for 10 years, parts for 5 years, the console for 2 years and labor for 1 year. Commercial use drops that to 5 years frame and 3 years parts. With no motor, the parts that wear are the slats and bearings, so the 5-year parts term is the one that matters, and it beats the CT250's 2 years.
Manual treadmills replace the motor with a rider-powered slat belt, so there are no brushes, coils, or controllers to fail.
SB Fitness builds the deck from flexible, shock-absorbing slats over nylon bearings and rates the slats for 150,000 miles. It publishes no cushioning measurement, so this is the brand's claim rather than a tested figure.
Score: 6. The owner's manual has you bolt each of the two columns to the deck during assembly (two bolts into the side and two from below, pp6-7), with the handrails built into the columns, so leaving them off is plausible. Losing the console costs only the readout: it displays stats, runs on 4 AA batteries, and controls nothing. The resistance lever is what you'd give up. It sits near the top of the right column (p5), its cable runs down inside that column to a coupler at the foot (p7), and there's no adjustment on the base. SB Fitness confirmed by email that once the cable is removed, the magnet arm drops to the lowest resistance setting on its own, and their sales lead doesn't think the CT400's arm can be held any higher. So rails-off, it walks at its easiest setting with no way to dial resistance up. That setting still has some drag: SB Fitness's tips sheet says the large magnet keeps constant tension on the belt.
Separately, the 12" step-up (CT250: 7.5") means your desk has to rise that much further above your usual standing height.
A curved slat treadmill with no motor and no power cord. You set the pace by where you stand on the curve: step toward the front to speed up, drift back to slow down, and stop walking to stop the belt. Nylon track bearings add a little natural drag, and the three magnetic resistance settings (low, medium, high) add more for power walking or sprint intervals. SB Fitness says the CT400 suits walking and jogging best and that long runs or all-out sprints feel harder on it than on the CT700 or CT850.
Lacks incline. Sports medicine recommends 3% for knee health. Why it matters + workaround.
Replacement parts
The CT400 has been on SB Fitness's store since December 2022 and is the brand's entry curved treadmill above the compact CT250. On 2026-10-06 the brand site listed it at $1,495, down from a $2,495 list price, with open-box and scratch-and-dent units a little cheaper. It has no Amazon listing.
Specifications from SB Fitness:
SB Fitness cites awards from Healthline ("Best Value Curved Treadmill"), Active.com and Greatist ("Best Budget Curved Treadmill") and RunToTheFinish ("Best for At Home Walker").
Stopping relies on the curve and gravity: high resistance slows the belt, and the rear of the deck curves upward to help you stop. The full handrails give balance support during the learning curve.
Within SB Fitness's curved lineup, the CT250 is the smaller, cheaper machine that some buyers adapt for desk walking by skipping the handrails, while the CT550, CT700 and CT850 add build quality and sprint capacity at higher prices.
![]() SB Fitness Equipment CT400 Check price | |
|---|---|
| Price (US) | $1,495 |
| Motor | Manual (no motor) |
| Belt (L x W) | 60" x 18" |
| Max user weight | 300 lb |
| Height | 61.6" |
| Footprint (L x W) | 73" x 30.5" |
| Unit weight | 165 lb |
| Shock absorption | Yes |
| App | No |
| Warranty | 5 yr |